Allgemeiner T
eil / General Section
CUC 2130 / M
1 - 24
GRUNDIG
Service
20
SPECIAL SETTINGS
_____________________________________________________________________
Notes:
Repeat the automatic channel search until the channel desired appears.
Cancel the automatic channel search with »
TXT
«.
The colour and sound standards are allocated automatically.
6
Select the line » Name« with »
P+
« or »
P-
«, and confirm with »
F
« (blue).
Select the position required with »
Ƿ
«, use »
P+
« or »
P-
« to select the letters or
digits required, and confirm with »
F
« (blue).
7
To fine tune the picture (when necessary), select the line » Finetun.« with
»
P+
« or »
P-
« and modify the fine tuning with »
Ǹ
« or »
Ƿ
«.
8
Save the setting with »
OK
«.
Note:
To set further TV channels, repeat points
3
to
8
.
9
Complete the setting with »
TXT
«.
Resetting all TV channels
All the TV channels can be reset (e.g. when you move town).
1
Call up »Dialog Center« by pressing »
i
«.
2
Select the line »Automatic Tuning System« with »
P+
« or »
P-
« and confirm
with »
OK
«.
– The »Adjust country« menu will be blended in.
3
Select a country with »
P+
« or »
P-
« and confirm with »
OK
«.
– The ATS search will start.
Adjusting colour standards manually
When the ATS search is used to set the TV channels, the colour standards are
allocated automatically. Do not carry out this setting if the colour is already well
adjusted on the various channels.
1
Call up »Dialog Center« by pressing »
i
«.
2
Select the line »Service« with »
P+
« or »
P-
« and confirm with »
OK
«.
3
Select the line »Color« with »
P+
« or »
P-
« and select the colour standard
required with »
Ǹ
« or »
Ƿ
«.
4
Complete the setting with »
TXT
«.
Note:
The lines » IDP2« and » Service Code« are for the exclusive use of the author-
ised dealer.
Factory settings
All picture and sound values are preset at the factory. This pre-setting can be
called up via the »Service« menu.
1
Select » Preset« with »
P+
« or »
P-
«.
2
Confirm the pre-set values with »
OK
«.
Dialog Center
OK
TXT
Language selection
Sleep Timer
Child lock
Special functions
Sort
Manual tuning
Automatic Tuning System
Service
ĵ
–––––––––––––––––––––––––––
Ł
Manual tuning
Ǻ
OK
Memorize
•
Change
TXT
Program
06
C/S
Channel
Channel
34
Finetun.
00
Name
RTL2
ĵ
–––––––––––––
Ł
Service
Ǻ
TXT
Preset
Color
P 01
ľ
auto
ı
IDP2 HP
Telet. language P 01
West
Service Code
– – – –
ĵ
–––––––––––
Ł
Service
Ǻ
TXT
Preset
Color
P 01
auto
IDP2 HP
Telet. language P 01
West
Service Code
– – – –
ĵ
–––––––––––
Ł
ENGLISH
21
INFORMATIONEN
_________________________________________________________
Technical data
Mains voltage:
220 – 240 V, 50/60 Hz,
(range of adjustment in the mains supply circuit 190 … 264 V)
Power requirement:
in operating mode 75 W, in standby mode 4 W
Final sound stage:
2x8 Watt music (2x4 Watt sine)
Frequency area:
C01 … C99, special channels S01 … S41, frequencies band 1 ... 4
Channel positions:
99 and 1 AV
SAT:
The TVset can be retrofitted with SAT module SER 2100
Service notes for the authorised dealer
The TV set may only be operated using the mains cable set supplied. It prevents mains interference
and is an integral part of the appliance approval. For replacement purposes, please only order the
mains cable set with the designation “GWN 9.22/part number 8290.991-316” from an approved
service specialist.
The product conforms to the following RU guidelines:
73/23/EEC guideline on electrical equipment for use within certain voltage limits. 89/336/EEC
guideline on electromagnetic compatibility.
The appliance complies with the standards: EN 60065, EN 55013, EN 55020
Contact assignment for the EURO-AV (Scart) socket
Pin
Signal
Pin
Signal
1
1
= Audio output right
12 =
–
1
2
= Audio input right
13 =
Red earth
1
3
= Audio output left
14 =
Earth
1
4
= Audio earth
15 =
RGB red input, (S-Video = Chroma)
1
5
= Blue earth
16 =
RGB switching voltage
1
6
= Audio input left
17 =
Video earth
1
7
= RGB blue input
18 =
RGB switching voltage earth
1
8
= Switching voltage
19 =
Video output
1
9
= Green earth
20 =
Video input, (S-Video = Luminanz)
10
= –
21 =
Shield/earth
11
= RGB green input
Additional Information for Units sold in Great Britain
Units sold in GB are suitable for operation from a 240 V AC, 50 Hz mains supply.
In case this appliance is supplied with a Safety Standard Approved mains lead fitted with a non-
rewireable 13 Amp mains plug which, if unsuitable for your socket, should be cut off and an appro-
priate plug fitted by a qualified electrician. The fuse and fuse holder must be removed from the plug
as accidental insertion of the redundant plug into a 13 Amp socket is likely to cause an electrical hazard.
Note:
The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13
Amp socket elsewhere.
If it is necessary to change the fuse in the non-rewireable plug, the correct type and rating (5 Amp
ASTA or BSI approved BS 1362) must be used and the fuse cover must be refitted. If the fuse cover is
lost or damaged the lead and plug must not be used until a replacement is obtained. Replacement
fuse covers should be obtained from your dealer.
If a non-rewireable plug or a rewireable 13 Amp (BS 1363) plug is used, it must be fitted with a 5
Amp ASTA or BSI approved BS 1362 fuse. If any other type of plug is used it must be protected by a
5 Amp fuse either in the plug or at the distribution board.
2
20
21
1
19
Important:
The wires in the mains lead are coloured in accordance with the following code:
BLUE – NEUTRAL, BROWN – LIVE
As the colours of the wires in the mains lead of your appliance may not correspond with the
coloured marking identifying the terminals in your plug, proceed as follows:
Connect the BLUE coloured wire to plug terminal marked with the letter "N" or coloured black.
Connect the BROWN coloured wire to the plug terminal marked with a letter "L" or coloured
red.
In no circumstance must any of the wires be connected to the terminal marked with a letter "E",
earth symbol
, coloured green or green and yellow.
Replacement mains lead can be obtained from your dealer.
