Symptom
Radio
Noise or sound
distorted on FM or
MW broadcasts.
FM STEREO indicator
does not light.
MW or FM, no sound.
CD Player will not play.
CD skips while playing.
Possible Cause
Station not tuned properly for
FM or MW.
FM: Wire aerial is not
positioned correctly .
Loop aerial is not positioned
correctly.
FM station is mono or station
signal is weak.
Function is not set to Tuner.
Volume at minimum.
Function is not set to CD.
CD is not installed or installed
incorrectly.
Disc is dirty or scratched.
Solution
Retune FM or MW broadcast
station.
Extend FM wire aerial.
Reposition so that the best
reception is obtained.
Extend FM aerial. Try other
strong stations.
Press TUNER button to select
Tuner function.
Increase Volume.
Press FUNCTION button to
select CD function.
Insert CD with label side up.
Press FUNCTION button to
select USB function.
Wipe disc with cloth or use
another disc.
Compact Disc Player
USB will not play
No sound from on the unit
speaker system.
Function is not set to USB.
USB DEVICE is not installed or
installed incorrectly.
Playback using any USB
DEVICE cannot be
guaranteed, please try another
USB DEVICE.
Increase the volume level on
the audio source device.
Insert USB DEVICE in to slot.
USB , iPod Player
Remarks:
If troubleshooting (see above) does not eliminate the problem, disconnect the unit
from the mains power and re-connect after a few seconds. Resetting causes the
unit to restore its factory default setting and results in all the setting made by the
user being deleted.
Incompatible USB DEVICE
used.
Input source is low.
iPod volume control does
not increase audio volume
Use the unit volume control for
volume control when the iPod
is docked on the unit.
iPod volume control only
controls volume output to the
headphone jack.
R
R
R
R
40
ENGLISH
TROUBLESHOOTING GUIDE