Grundig BLUEBEAT GSB 500, User Manual

Page: 10 / 12

ENGLISH 16­
Play­Audio­signal­from­an­
external­device
Alternative you can listen to the sound of a
connected external device (e.g. a MP3 player)
through your device.
Notes:­
7
Your GSB 500 will auto-switch into AUX IN
mode from Bluetooth mode after insert AUX
IN cable to the device and if the playback
is stopped on the Bluetooth device.
7
If want to back to Bluetooth mode, please
remove AUX IN cable from the » AUX­IN «
socket and start the playback on the Blue-
tooth device again.
1 Use a standard audio adapter to connect the
audio outputs of the external device to the
» AUX­IN « (ø 3.5 mm) socket.
2
Press and hold the »
8
« button for 2 seconds to
turn on the unit.
3 Switch on the external device and starts play-
back.
4 Press »
8
« to start playback.
5
Press »
8
« again to pause playback.
6 Press »
8
« to resume playback.
7
Press »
+
« or »
–
« to adjust the volume.
Battery­Saving
The device will enter a power saving mode if no
audio signal is played for 30 minutes.
1
Press and hold the power button »
8
« 2 sec-
onds to wake up the device.
Switch­off
1
Press and hold the »
8
« button for 3 seconds to
turn off the unit.
OPERATING
­ ___________________________________________________________
Reconnecting­the­Bluetooth­device
1 If you move out of range or turn off the Blue-
tooth feature on your device, the unit will dis-
connect from your device.
2
To reconnect, simply access the Bluetooth Man-
ager on your Bluetooth device and select the
GSB 500. You will not be asked to enter the
PIN code again.
Note:
7
In case of the registered GSB 500 can-
not connect to the Bluetooth device again,
please remove the GSB 500 from the Blue-
tooth device list, search and connect again.
Out­of­Range­or­Lost­Signal
If the Bluetooth device is out of range (beyond
9 m) of the unit or if there is something block-
ing the Bluetooth signal, the Bluetooth indicator
»
A
« will flash slowly to indicate that the Blue-
tooth connection with the Bluetooth device has
been lost.
To­avoid­a­lost­connection:
1 Move the Bluetooth device back into range
(within 9 m), and/or make sure there’s a clear
line of sight between the GSB 500 and the
Bluetooth device.
2 If the connection is lost , the connection will
need to be reestablished. Follow the directions
under “Reconnecting the Bluetooth device”.