Grundig Bluebeat GSB 110, User Manual

Page: 7 / 11

7­ ENGLISH
Connecting­the­power­adapter
Note:
7
The device can also be charged on a com-
puter using the micro USB cable supplied.
1 Connect the single plug of a standard USB
Micro adapter into the » MICRO­USB « sock-
et.
2
Connect the USB Micro adapter into the wall
socket.
Caution:
7
The device is connected to the mains with
the USB Micro adapter. Pull out the USB
Micro adapter if you want to completely
disconnect the device from the mains.
7
Make sure the USB Micro adapter is eas-
ily accessible during operation and not hin-
dered by other objects.
Charging­the­device
1
The USB Micro adapter to the device will au-
tomatic recharge the internal rechargeable
battery.
– The charging indicator illuminate “red“
while the device is charging and disappear
when the device is fully charged.
Notes:
7
Charge the unit for about 3 hours.
7
If the device is switched on and not con-
nected to the mains supply via the USB
micro adapter, the Bluetooth indicator will
indicate if the battery is empty (blue indica-
tor turns off).
CONNECTION­AND­PREPARATION
­____________________
Using­and­maintaining­your­­
rechargeable­battery
7
The battery must be charged at least 3 hours
prior to first use.
7
For long period of storage, please recharge
the battery at least once every two months to
maintain the battery in optimum condition.
7
Once the battery is fully discharged, immedi-
ately recharge regardless of whether you plan
to use the battery or not in order to maximize
battery life.
7
Recharge efficiency will degrade when envi-
ronmental temperatures drop below 5°C or
exceed 35°C.
Warning:
7
Do not expose the battery to temperatures
in excess of 45C.
Connecting­external­devices
Note:­
7
Switch the device off before you connect
external devices.
1
Use a standard audio adapter to connect the
audio outputs of the external device to the
»
AUX­IN
« (ø 3.5 mm) socket.
Notes:­
7
The GBS 110 will auto-switch into AUX IN
mode from Bluetooth mode after insert AUX
IN cable to the device.
7
If want to back to Bluetooth mode, please
remove AUX IN cable from the »
AUX­IN
«
socket.