Grundig Allixx SCC 5460 RDS, Service Manual

Page: 6 / 28

Allgemeiner Teil / General Section
1 - 6 GRUNDIG Service
Allixx SCC 5460 RDS / Allixx SCD 5490 RDS
Symbols and abbreviations
Temperature too high
Device is coded
TP Standby mode for traffic news is
activated
AF Alternative frequencies are activated
1...5 Preset button number of the selected
station: 1,2,3,4,5
Memory levels 1, 2, 3
Radio:
IS Intelligent search – RDS
SRC Search
MAN Manual tuning
PTY Programme type selected
SCN Scan mode – stations heard briefly
CD:
NRM Normal playback function
SCN Scan mode – the first ten seconds of
each track are played
RND Random mode – the tracks are play-
ed back in random order.
RPT Repeat mode – all the tracks on the
CD are played repeatedly.
6
ENGLISH
OVERVIEW ________________________________________________________________________________
Input sources (CD, AUX)
CD input source selected
CD mode
CD changer mode
(if connected)
Phone mode
T
CD
Display
Input sources (Radio)
FM input source selected
FM band (1-3)
Memory button 1, memory level 1
AM input source selected
AM band (1-3)
Memory button 2, memory level 2
1
TP CD
IS
GO
DLF
FM
CD
NRM
TRK 2 04:43
CD
GO
14
ENGLISH
EXPERT LEVEL ______________________________________________________
To make the use of the device as simple as poss-
ible, a number of custom settings which are only
required once or very occasionally are located
on a special operating level (EXPERT).
Changing EXPERT settings
1 Keep pressing » SOUND « until »EXPERT«
appears in the display.
2 Use the volume knob to select the
required EXPERT setting, e.g. volume limit
on switching on. Display: »ON Volume: 3«.
3
To activate it, briefly press the
SOUND
button.
– Display: »the selected programme, display-
ed inversely«. It is played at the volume dis-
played.
4 Use the » < « or » > « soft keys or the volume
knob to select the required volume.
5 Briefly press SOUND to conclude the setting.
A setting is only possible if there is a speed con-
trolled signal at the SCV connection (A1).
» SCV: Off« : SCV is switched off
» SCV: 140 « : Maximum effectiveness
The speed change while driving is shown in the
top right section of the display, e.g. +4.
6:
TP Mode – TP function on/off
- Display: on/off
When TP is »off«, the » TP « button is inactive.
7:
TP Volume – Minimum volume for radio traf-
fic news.
– Display: »TP Volume 5« to »TP Volume 30«.
Volume level, bordered display.
8: Phone – Muting in car phone mode.
– Display: »Mute« – Muting of the car radio is
activated.
– Display: »Off« – Muting of the car radio is
not activated.
– Display: »On« – You hear the phone via the
speakers.
Note:
The phone mute signal (see page 17) must be
connected.
6 To carry out the next setting repeat steps 2 to
5 .
7 To quit expert level keep pressing SOUND
until you hear the signal.
The individual settings
1: L
anguage – English, German, French,
Italian: the selection of display languages.
2:
Protection – Code settings to prevent theft –
see the detailed instructions starting on page
16.
3:
ON Volume – Volume limit when switching
on.
– Display: »ON Volume ––«: no limit.
– Display: »ON Volume 00« to »ON Volume 30«:
a limit is entered.
4: Loudness – Boosts low frequencies at low
volumes
– Display: »Loudness« »low«, »normal« or
»high«.
5:
SCV – Speed Controlled Volume
– Display: »SCV: OFF«. SCV 1...140.
ʀ