Allgemeiner T
eil / General Section
Advance CD
1 - 12
GRUNDIG
Service
Radio
AIM storage capacity
– approx. 3 minutes
➭
page 23, EXPERT setting
«`
.
If the AIM memory is full the oldest traffic
announcements will be deleted.
AIM memory standby
If the car radio is on
the AIM memory standby is always on when
– a traffic radio station is set;
»
TP
« is shown in the display and the
–
¡
AIM TP
button is “activated”.
If the car radio is off
– AIM function (on)
➭
page 23: EXPERT setting
«?
.
– Before switching off the radio:
Traffic radio station is set: »
TP
« in the
display and
¡
AIM TP
button is “activated”
– aerial is ready to receive.
– If TIMER is preselected:
switch-on time(s) set.
➭
page 23-24: EXPERT setting
«Q
or
«W
.
Listen to AIM memory
Press
¡
AIM TP
button briefly; in the display …
Example
»
MO7 O6:15
«:
– 7 traffic announcements are stored.
– First you will listen to the last (most recent)
traffic announcement (MO7) of 6:15 a.m.
– Successively you will listen to all recordings.
AIM memory empty:
»
NO MSG
« (No Message).
If you want a traffic announcement to be …
– repeated or skipped: press
¡
<
NEXT
button or
¡
NEXT
> button briefly.
– “fast forwarded or rewound”:
hold down
¡
NEXT
> button or
¡
<
NEXT
button.
– “Delete” AIM memory
While listening to the AIM memory, press
¡
U III
button until signal tone sounds:
In the display »
NO MSG
« (No Message).
Note
No AIM memory standby
with car radio switched off
if, when switched off, in the display:
»
NO AIM
«.
If AIM memory is on and car radio is off:
– Traffic announcements that are older than
6 hours are deleted.
– If the car radio is not switched on for one
week with TIMER preselected (set switch-on
times), switching on of the TIMER will be
suppressed until the car radio is switched
on again (current consumption).
Some vehicles, when being exited, indicate
sources of current consumption that have not
been switched off, e.g. lights. This may also
be the case when the AIM memory of your car
radio is in standby mode.
Ask your car dealership whether this applies
to your vehicle and what can be done to reme-
dy this problem. In most cases it is sufficient
to connect connection A7 (+12 V) of the car
radio directly to the battery and
connection A8 (– earth) of the car radio
directly to the vehicle earth.
Line cross-section at least 1.5 mm
2
.
For safety reasons it is imperative that a fuse
holder (with fuse 16 A) is used for connecting
the b12 V with connection A7 of the
car radio! The fuse holder should be placed
directly (short cable) at the battery.
Programme types (PTY)
Prerequisite
The radio station tuned to must offer the "Pro-
gramme types" service PTY in the VHF range.
Programme types
The programme types a radio station offers
change according to the programme being
broadcast.
NEWS
News and current events
AFFAIRS
Politics and current affairs
INFO
Special talk programme
SPORT
Sport programme
EDUCATE Learning and continuing
education
DRAMA
Radio plays and literature
CULTURE Culture, church and society
SCIENCE
Science
VARIED
Talk entertainment
POP
Pop music (hits)
ROCK M
Rock music
M.O.R.M
Light music
LIGHT M
Light classical music
CLASSICS Serious classical music
OTHER M Music programmes that cannot
be categorised (e.g., Folklore)
NO PTY
No programme type identifier
PTY programme buttons
The station button
are assigned to the following programme
types:
1
NEWS,
2
SPORT,
3
POP (with M.O.R.M)
und
4
CLASSICS (with LIGHT M).
The station button
5
PERS (personal) can be assigned to a
programme type of your choice.
1. Switch on the PTY function.
Briefly press the
¡
PTY/DX
button.
2. Repeatedly press the
“
<
or
“
>
button
until the desired programme type is shown
in the display.
3. Press the
5
button until the signal sounds.
Radio
PTY function
1. Activating the PTY function
Press the
¡
PTY/DX
button briefly:
the last selected programme type is shown
in the display.
2. Set the desired programme type …
– with the PTY programme buttons
NEWS, SPORT, POP, CLASSICS or PERS
Press the respective button briefly:
the PTY search starts automatically and
moves to the next station offering the pro-
gramme type selected. The display shows
"
PTY ...
"
– or –
Briefly press the
“
<
or
“
>
button until the
desired programme type is shown in the
display.
Press the
“
<
or
“
>
button until the signal
sounds.
The PTY search moves to the next station
offering the selected programme type and
the programme type, for example, "
POP
" is
shown.
If no station is offering the selected pro-
gramme type, you will hear the station
last tuned to and the PTY function is
deactivated.
3. Deactivating the PTY function
Briefly press the
¡
PTY/DX
button, or
automatically after approx. 10 seconds.
Radio
¡
PTY/DX
1
–
5
“
<
“
>
¡
CD
On multimedia CDs, data tracks are
recorded in addition to the sound tracks.
If you play such a CD despite of the warning
message, noise may be generated in a volume
which can endanger traffic. In addition, the
receiver’s output stages and the loudspeakers
may be damaged.
Selecting the CD programme source
Insert a CD into the CD compartment.
The display indicates ”
T01 00:00
” – or –
a CD is in the CD compartment:
Repeatedly press the
¡
CD
button until the
display indicates ”
CD
”.
If the CD is not completely pulled in, the
display will indicate ”
NO CD
”.
You can exit this condition by inserting the CD
once again or by pressing the
¡
CD
button.
Using the
¡
CD
button, you can switch bet-
ween the built-in CD player and a connected
CD changer.
If you select the built-in CD player, the display
will indicate , for example, "
T01 00:00
".
If you select the CD changer, the display will
indicate "
MCD 1
" and then, for example,
"
1 CD1 T01
", or immediately "
1 CD1 T01
".
Attention with automatic aerials!
The radio switches automatically on as soon
as you insert a CD.
This causes also the aerial to be extended!
See also the note on page 3!
Selecting or repeating a track
Briefly (repeatedly) press the button until the
number of the desired track is shown in the
display.
“
>
button: go to next track.
“
<
button: go to previous track or repeat
current track.
Fast forward and reverse
To listen to tracks in "Quick preview" at
reduced volume:
Forward Press and hold down the
“
>
button.
Rewind: Press and hold down the
“
<
button.
Playing the tracks on a CD for approx.
10 seconds (TRACK SCAN)
Press the
¡
CD
button until the signal
sounds:
"
TR SCAN
" appears briefly in the display.
Terminate:
Briefly press the
¡
CD
button:
"
RESET
" appears briefly in the display.
CD Mode
