27
QUICK REFERENCE GUIDE, cont'd.
Activate (Enabling) Timer (page 22)
Press
'1' and/or'2'
Lock (or Unlock) Controls (page 14)
Press and hold
until
is displayed
(extinguishes). Pushbuttons and TUNING knob are inactive
(active).
Lamp On/Off (page 13)
Press
to turn display backlight on or off.
Disable Beep (page 13)
Press
to enable or disable audio beep.
MEMORY FUNCTIONS
Store Memory Channel (page 19)
Select bandwidth and adjust frequency.
Press
.
'MEMORY' will light and channel number
flashes,
use 'Direct-Key-Input' keypad to enter two digit
memory channel number from '00' to '69'.
Recall Memory Channel (page 19)
Press
,
desired two number digit from
'Direct-Key-Input' keypad or use
and
buttons.
Skip Memory Channel (page 20)
Press
,
desired two digit number from
'Direct-Key-Input' keypad.
Press
.
'S' will appear next to memory channel number.
Delete a Memory Channel (page 19)
desired two digit number from 'Direct-Key-Input'
keypad.
Press and hold
for 3 seconds.
Delete all Memory Channels (page 25)
With power off, press
while pressing the
button.
Hold
until confirmation beep indicates all channel
memory has been deleted.
SCAN MODE
The scan feature only works with channels
programmed within a block (page 20)
Scan memory (page 20)
desired two digit number from 'Direct-Key-Input'
keypad to select the block to scan.
Then
to start scan.
REAR PANEL CONTROLS
Shortwave Antenna Select (page 15)
Select '1', '2', or 'WHIP' as desired. Connect appropriate
antenna(s).
FM/AIR Antenna Select (page 15)
Select either 'EXTernal' or 'WHIP' as desired. Connect
appropriate antenna.
