Grundig 43 VLX 7010, User Manual, Page: 73 / 99

73­ ENGLISH
NETWORK­SETUP
­-------------------------------------------------------------------------------------------
Wireless­WPS­network­connection­with­
PIN
1­
Press » «.
2­ Press »
>
« to select »Settings«.
3­
Press »
V
« then »
>
« to select »Network«
and confirm with »  «.
– »NETWORK« menu will be displayed.
4­ Press »
V
« to select »Join Network Using
WPS (PIN)« and press »  «.
– 8-digit pin code is displayed in the
wireless WPS menu.
Network
JOIN NETWORK USING WPS (PIN)
Cancel
Searching for Wi-Fi...
To connect to the Internet
using a WPS PIN, please enter
the following PIN on your
Wi-Fi router. This setup can
take up to two minutes.
61913271
Notes:
7
Refer to the manual of your router to find
out how the PIN is entered via a PC.
7
The 8-digit PIN code must be entered in the
modem interface in 2 minutes; otherwise,
connection of television with the modem is
cut.
5­
Use a computer to enter PIN to the router
(e.g. AVM FRITZ!Box: menu item WLAN
Settings... WPS) and save.
– »Connected to Wi-Fi network
"Modem_1".« will be displayed and the
modem will be connected.
6­ In the »NETWORK« menu, press »
8!
« to
check status of the network connection.
– Network connection status will be
displayed.
7­ Press »

« to return to the previous menu or
press » « to return to »Home« menu.
Auto­connection­by­inputting­the­
network­password
If your router does not support "WPS-PBC” or
WPS PIN entry, use this method to connect.
1­ Press » «.
2­ Press »
>
« to select »Settings«.
3­
Press »
V
« then »
>
« to select »Network«
and confirm with »  «.
– »NETWORK« menu will be displayed.
Network
NETWORK
Modem_1
WPA2 PSK
Modem_2
WPA2 PSK
Modem_3
WPA2 PSK
See All Networks
Join Network Using WPS (Button)
Join Network Using WPS (PIN)
Signal Strength
Very Good
Security
WPA2 PSK
Available
4­
Press »
V
« to select »See All Networks« and
press »  « to confirm.
– Available wireless networks will be
displayed in the »SEE ALL NETWORKS«
menu.
5­ Press »
V
« or »
Λ
« to select the network you
want to connect to and confirm with »  «.
– Wireless connection password screen will
be displayed.
6­ Select the required character with »
<
«,
»
>
«, »
V
« or »
Λ
« and move to the next
character with »  «.
– You can press » « to switch between
uppercase and lowercase letters.
– You can press »#$%« / »äçé«
➡
»  « to
switch between special characters.
– Press »
§
« to delete the character typed.
7­
Press »
8!
« to select »CONNECT«.
– Modem will be connected.
8­ In the »NETWORK« menu, press »
8!
« to
check status of the network connection.
– Network connection status will be
displayed.
9­ Press »

« to return to the previous menu or
press » « to return to »Home« menu.