Grundig 43 VLE 5523 BN, User Instructions

Page: 69 / 82

69­
ENGLISH
SETTING­FURTHER­CHANNELS
­-----------------------------------------------------
5­
Select the line » Digital Manual Tuning« with
»
V
« or »
Λ
« and press »
OK
« to confirm.
– The menu appears.
6­ Enter the channel number directly with
» 1...0 «.
– After the search is complete, the channels
found are displayed in the »Results« menu.
7­ Press » MENU « to finish the setting.
Automatic­service­update­
If this function is activated, possible changes of
network operators are updated automatically.
The unit must be located in stand-by mode.
1­ Open the menu with » MENU «.
2­ Select the menu item »SOURCE SETUP«
with »
V
« or »
Λ
« and press » OK « to
confirm.
3­
Select the line »Automatic Service Update«
with »
V
« or »
Λ
«.
4­ Select the automatic update with »
<
« or
»
>
« (»On«).
5­ Press » MENU « to end setting.
6­
Select the line »Scan Typ« with »
V
« or »
Λ
«
and set the option »DTV« with »
<
« or »
>
«.
7­ Start the scan with »

« (red).
– All channel and favourites lists will be
deleted and compiled anew.
Note:
7
After starting the scan, a security query will
appear. Press »

« (green) to confirm the
option »Yes«.
– The »Reults« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– The scan is complete as soon as the
»PROGRAM TABLE« appears.
Note:
7
You can abort the search by pressing
» MENU «.
8­ Press » MENU « to end the setting.
Searching­for­digital­terrestrial­
TV­channels­manually
1­ Open the menu with » MENU «.
2­ Select the menu item »SOURCE SETUP«
with »
V
« or »
Λ
« and press » OK « to
confirm.
– The »SOURCE SETUP« menu appears.
3­
Select the line »Source« with »
V
« or »
Λ
«
and press »
OK
« to confirm.
Select the option »Air« with »
<
«, »
>
«, »
V
«
or »
Λ
« and press »
OK
« to confirm.
Caution:
7
The antenna power supply (line »Active
Antenna Power«) may only be switched on
if the antenna is an active indoor antenna
with a signal amplifier and it is not already
supplied with a voltage via a mains plug
(or similar supply). Otherwise you may
cause a short circuit and irreparably dam-
age your antenna.
4­ Select the line »Active Antenna Power««
with »
V
« or »
Λ
«. Switch on the antenna
power supply for the antenna with »
<
« or
»
>
« (»On«).