ENGLISH
30
USBMODE
--------------------------------------------------------------------------------------------------------------
Connectingexternaldatamedia
It is advised to put the television on stand-by
mode before connecting the External Data
medium. Connect the device and then switch the
television on again.
Before disconnecting the data medium, the
television must first be switched to standby,
otherwise files can be damaged.
Note:
7
If you are using a power cable for the
external hard disk that you have connected
to the »
USB
« interface, then the power
cable of the external hard disk must also be
unplugged when the TV is turned off.
7
You must not disconnect the USB Device
from the TV while a file on the USB Device
is being read by the TV.
7
A bi-directional data transfer as defined for
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
7
USB transfer is not an operating mode in
itself. It is only an additional function.
1
Connect the »
USB
« interface of the
television and the corresponding socket on
the data device (external hard disk, digital
camera, card reader or MP3 player) using
a USB cable.
or
plug the memory stick into the »
USB
« USB
interface of the television.
