15
ENGLISH
Tuningthetelevisionchannels
fromsatellite(DVB-S/S2)
You have two options for tuning digital satellite
channels.
A
The easy installation,
which pre-configures all antenna settings for
the satellite channels on Astra 19.2° East.
B
The advanced installation
can be used if you wish to receive satellite
channels from various satellites. To do so,
you must make the antenna settings (Satel-
lite, LNB Power, LNB Type, DISEqC Mode,
LNB Selection) for the satellites chosen.
Easyinstallation
1
In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
with »
<
« or »
>
«.
2
Select the line »Easy Installation« with »
V
«
or »
Λ
« and press »
OK
« to confirm.
– Other menu options will be displayed,
the satellite Astra 19.2° East is preset.
3
Start the scan with »
« (green).
– The »Search results« menu appears, and
the scan for TV channels begins.
– Depending on the number of television
channels received, this can easily take a
few minutes.
– The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
Note:
7
You can abort the scan by pressing »
EXIT
«.
Advancedinstallation
1
In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
with »
<
« or »
>
«.
2
Select the line »Advanced Installation« with
»
V
« or »
Λ
« and press »
OK
« to confirm.
– The menu appears.
Satellite
ASTRA 19.2°,E
Transponder
11362 MHz H
LNB Power
Off
DISEqC Mode
Off
LNB Type
Universal
LNB Selection
Off
Auto Tuning
Quality
Signal strength
Poor Normal Good
Exit
Back
INSTALLATION
ANTENNA SETTINGS
Manual Tuning
08.08.2012
15:46
3
Select the line »Satellite« with »
V
« or »
Λ
«
and press »
OK
« to confirm.
– The »SELECT SATELLITE« menu appears.
Select the satellites with »
V
«, »
Λ
«, »
<
« or
»
>
« and press »
OK
« to confirm.
Note:
7
The setting in the line »Transponder« is not
required for this automatic scan.
4
Select the line »LNB Power« with »
V
« or
»
Λ
«.
Depending on the type of LNB, set the LNB
power supply to »13/18 V« or »14/19 V«
with »
<
« or »
>
«.
5
Select the line »LNB Type« with »
V
« or »
Λ
«.
Select the type of LNB installed with »
<
«
or »
>
«.
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------