background image

ENGLISH

­34

INForMAtIoN

­---------------------------------------------------------------------------------------------------------------------

troubleshooting

If the information provided below does not help, please consult an authorised GRUNDIG dealer. 

Please bear in mind that malfunctions can also be caused by external devices such as video recorders 

or satellite receivers.

Note:

7  

 This is a Class A product. During operation the device could cause radio interference. In this case 

the user may have to remedy this. Please contact your specialist dealer.

problem

possible­cause

remedy

Screen lit (snow), but no 

 station visible

Antenna cable

Is the antenna cable connected?

No TV channel tuned

Start a channel scan

Insufficient contrast in picture

The picture settings are not correct

Adjust the brightness, contrast or 

 colour setting

Problem at station

Try another channel

Picture and/or sound distorted Interference from other devices 

Place the device in a different position

Ghosting, reflection

Channel setting

Automatic or manual tuning/fine tuning

Antenna

Have antenna cable or system checked

No colour

Colour intensity too low

Turn up the colour

Adjust TV standard (if setting option 

is available)

Select the correct colour standard

Problem at station

Try a different channel

Picture but no sound

Volume is set to a minimum

Turn up or switch on the volume

Teletext impaired or absent

Problem at station

Try a different channel

Television channel (no teletext)  

or antenna system

Try with a different TV channel,  

carry out fine tuning

Station signal too weak

Check antenna

The remote control does  

not work

Obstacle between remote control 

and device.

Point remote control at television

Battery problem

Check batteries and replace if 

 necessary

Operating mode undefined

Switch off the television at the mains 

switch for two minutes

Picture too dark in PC mode

Incorrect setting for picture resolution 

and picture frequency on the PC

Change settings on the PC  

(e.g. 1280 x 768 resolution,  

refresh rate 60 Hz)

Summary of Contents for 32 VLE 434 BA



































Reviews: