Grundig 28 CLE 5407 BG, Manual

Page: 15 / 67

­15
ENGLISH
tuning­the­television­channels­
from­satellite­(DvB-s/s2)
You have two options for tuning digital satellite
channels.
A
The easy installation,
which pre-configures all antenna settings for
the satellite channels on Astra 19.2° East.
B The advanced installation
can be used if you wish to receive satellite
channels from various satellites. To do so,
you must make the antenna settings (Satel-
lite, LNB Power, LNB Type, DISEqC Mode,
LNB Selection) for the satellites chosen.
easy­installation
1
In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
with »
<
« or »
>
«.
2 Select the line »Easy Installation« with »
v
«
or »
Λ
« and press » oK « to confirm.
– Other menu options will be displayed,
the satellite Astra 19.2° East is preset.
3
Start the scan with »

« (green).
– The »Search results« menu appears, and
the scan for TV channels begins.
– Depending on the number of television
channels received, this can easily take a
few minutes.
– The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
note:
7
You can abort the scan by pressing » exit «.
Advanced­installation
1 In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
with »
<
« or »
>
«.
2
Select the line »Advanced Installation« with
»
v
« or »
Λ
« and press »
oK
« to confirm.
– The menu appears.
Satellite
ASTRA 19.2°,E
Transponder
11362 MHz H
LNB Power Off
DISEqC Mode Off
LNB Type Universal
LNB Selection Off
Auto Tuning
Quality
Signal strength
Poor Normal Good
Exit
Back
INSTALLATION
ANTENNA SETTINGS
Manual Tuning
08.08.2012
15:46
3
Select the line »Satellite« with »
v
« or »
Λ
«
and press »
oK
« to confirm.
– The »SELECT SATELLITE« menu appears.
Select the satellites with »
v
«, »
Λ
«, »
<
« or
»
>
« and press »
oK
« to confirm.
note:
7
The setting in the line »Transponder« is not
required for this automatic scan.
4 Select the line »LNB Power« with »
v
« or
»
Λ
«.
Depending on the type of LNB, set the LNB
power supply to »13/18 V« or »14/19 V«
with »
<
« or »
>
«.
5 Select the line »LNB Type« with »
v
« or »
Λ
«.
Select the type of LNB installed with »
<
«
or »
>
«.
settinGs
­-----------------------------------------------------------------------------------------------------------------------------------------