English (GB)
45
14.27 Radio communication (Enable/disable radio
comm.)
You can set the radio communication to either enabled or
disabled. You can use this function in areas where radio
communication is not allowed.
Factory setting
See section
.
14.28 Language
This menu is only available in the advanced control panel.
In this menu you can select the desired language. A number of
languages is available.
14.29 Date and time (Set date and time)
The availability of this menu depends on the functional module
fitted in the pump:
* See section
22. Identifying the functional module
You can set date and time as well as how they are to be shown in
the display:
• Select date format:
YYYY-MM-DD
DD-MM-YYYY
MM-DD-YYYY.
• Select time format:
HH:MM 24-hour clock
HH:MM am/pm 12-hour clock.
• Set date
• Set time.
Factory setting
See section
.
14.30 Unit configuration (
Units
)
In this menu you can select between SI and US units. The setting
can be made generally for all parameters or customised for each
individual parameter.
Factory setting
See section
.
14.31 Buttons on product (Enable/disable settings)
In this display, you can disable the possibility of making settings.
Grundfos GO
If you set the buttons to "Not active", the buttons on the standard
control panel will be disabled. If you set the buttons to "Not
active" on pumps with an advanced control panel, see below.
Advanced control panel
If you have disabled the settings, you can still use the buttons to
navigate through the menus but you cannot make changes in the
"Settings" menu.
When you have disabled the possibility to make settings, the
symbol will appear in the display.
Factory setting
See section
14.32 Delete history
This menu is only available in the advanced control panel.
In this menu, you can delete the following historic data:
• Delete work log.
• Delete heat energy data.
• Delete energy consumption.
14.33 Define Home display
This menu is only available in the advanced control panel.
In this menu, you can set the "Home" display to show up to four
user-set parameters.
14.34 Display settings
This menu is only available in the advanced control panel.
In this menu you can adjust the display brightness and set
whether or not the display is to turn off if no buttons have been
activated for a period of time.
Pump variant
Radio communication
(Enable/disable radio
comm.)
TPE3, TPE3 D
●
TPE2, TPE2 D
●
Note
IR communication will remain active.
Pump variant
Language
TPE3, TPE3 D
●
TPE2, TPE2 D
●
Pump variant
Date and time
(Set date and time)
TPE3, TPE3 D
●
TPE2, TPE2 D
●
Function (terminal)
FM 200*
(standard)
FM 300*
(advanced)
Date and time
-
●
Pump variant
Buttons on product
(Enable/disable settings)
TPE3, TPE3 D
●
TPE2, TPE2 D
●
Note
Advanced control panel:
To unlock the pump and allow settings, press and
simultaneously for at least 5 seconds.
Standard control panel:
The
button always remains active but you can
only unlock all other buttons on the pump with
Grundfos GO.
Pump variant
Delete history
TPE3, TPE3 D
●
TPE2, TPE2 D
●
Pump variant
Define Home display
TPE3, TPE3 D
●
TPE2, TPE2 D
●
Pump variant
Display settings
TPE3, TPE3 D
●
TPE2, TPE2 D
●
