11
English (US)
Fig. 32 Fitting the clamp ring
5. Place the screw (93) on one side and nut and washer (94) on
the other side and tighten. Torque: 6.1 ± 0.1 Nm.
6.8 Connecting the power cable via the pressure
switch
Fig. 1
Plugs and pressure switch connections
1. Locate the power-supply terminal and cable clamp inside the
pressure switch (407).
Fig. 2
Connecting the power cable via the pressure switch
2. Loosen the cable clamp.
3. Push one end of the cable through the cable gland located on
the side of the pressure switch.
4. Connect the cable conductors to the power-supply terminals
inside the pressure switch. See wiring diagram.
5. Tighten the terminal screws. Torque: 2.2 ± 0.2 Nm.
6. Tighten the cable clamp screw. Torque: 1.5 ± 0.1 Nm. Make
sure not to overtighten the cable clamp screw.
7. Fit the cover onto the pressure switch and fasten the nut on
the top of the pressure switch cover.
TM0
7
453
5
1
4
1
9
T
M
07
45
18
14
19
TM
07
43
74
13
19
26
32
1
31
408
25
407
Summary of Contents for JP PS Series
Page 16: ...16...
