Eng
lis
h
(G
B)
5
3. Installation
A cleaning cloth and a piece of double-adhesive tape are supplied with the
antenna.
Before the antenna is installed, check that the surface is clean and smooth.
Install the antenna using the double-adhesive tape supplied.
Install the antenna as follows:
1. Clean the surface on the back of the antenna with the cleaning cloth
supplied.
2. Remove the protective foil from one side of the double-adhesive tape,
and attach the tape to the back of the antenna.
3. Remove the protective foil from the other side of the tape.
4. Place the antenna on the surface, and press it against the surface to
ensure correct adhesion.
Install the antenna so that the signal is not disturbed by the surroundings.
Fig. 1
GSM antenna (back side)
Caution
To avoid mechanical stress, the antenna should not be
installed at doors or similar.
Caution
For vertical installation, the cable must point downwards.
Note
Do not install the antenna if the surface temperature is lower
than -10 °C.
T
M
04 6355 0210
