background image

English (GB)

7

3.3 Pump types

The DMH 25X dosing pump is available for a variety of 
performance ranges in various sizes. Pump type and designation, 
see pump nameplate.
The following is indicated on the pump nameplate (see section 

3.1 Identification

):

• The pump type which specifies the stroke volume, connection 

size and performance data (see below).

• The pump serial number which is used to identify the pump.
• The most important characteristics of the pump configuration 

e.g. for dosing head and valve materials. They are described 
in section 

3.2 Type key

.

• Maximum flow rate and maximum counter-pressure.
• Mains frequency.
The following is indicated on the motor nameplate:
• required energy
• mains frequency
• power consumption
• enclosure class.

3.4 Pump performance

Performance data at maximum pump counter-pressure

Pump type

50 Hz

60 Hz

100 Hz

Single pump

Double pump

Q*

p max.

Max. 

stroke 

rate

Q*

p max.

Max. 

stroke 

rate

Q*

p max.

Max. 

stroke 

rate

[l/h]

[bar]

[n/min]

[l/h]

[bar]

[n/min]

[l/h]

[bar]

[n/min]

DMH 251

DMH 2.4-10

DMH 2.4-10/2.4-10

2.4

10

14

2.9

10

17

5

10

29

DMH 5-10

DMH 5-10/5-10

5

10

29

6

10

35

10

10

58

DMH 13-10

DMH 13-10/13-10

13

10

63

16

10

75

25

10

126

DMH 19-10

DMH 19-10/19-10

19

10

96

23

10

115

-

-

-

DMH 24-10

DMH 24-10/24-10

24

10

120

-

-

-

-

-

-

DMH 2.3-16

DMH 2.3-16/2.3-16

2.3

16

14

2.8

16

17

4.5

16

29

DMH 4.9-16

DMH 4.9-16/4.9-16

4.9

16

29

5.9

16

35

9.8

16

58

DMH 12-16

DMH 12-16/12-16

12

16

63

14

16

75

24

16

126

DMH 18-16

DMH 18-16/18-16

18

16

96

22

16

115

-

-

-

DMH 23-16

DMH 23-16/23-16

23

16

120

-

-

-

-

-

-

DMH 2.2-25

DMH 2.2-25/2.2-25

2.2

25

14

2.6

25

17

4.4

25

29

DMH 4.5-25

DMH 4.5-25/4.5-25

4.5

25

29

5.4

25

35

9

25

58

DMH 11-25

DMH 11-25/11-25

11

25

63

13

25

75

22

25

126

DMH 17-25

DMH 17-25/17-25

17

25

96

20

25

115

-

-

-

DMH 21-25

DMH 21-25/21-25

21

25

120

-

-

-

-

-

-

DMH 252

DMH 11-10

DMH 11-10/11-10

11

10

29

13

10

35

22

10

58

DMH 24-10

DMH 24-10/24-10

24

10

63

29

10

75

48

10

126

DMH 37-10

DMH 37-10/37-10

37

10

96

44

10

115

-

-

-

DMH 46-10

DMH 46-10/46-10

46

10

120

-

-

-

-

-

-

DMH 10-16

DMH 10-16/10-16

10

16

29

12

16

35

20

16

58

DMH 23-16

DMH 23-16/23-16

23

16

63

27

16

75

46

16

126

DMH 36-16

DMH 36-16/36-16

36

16

96

43

16

115

-

-

-

DMH 45-16

DMH 45-16/45-16

45

16

120

54

16

144

-

-

-

DMH 54-16

DMH 54-16/54-16

54

16

144

-

-

-

-

-

-

DMH 253

DMH 21-10

DMH 21-10/21-10

21

10

29

25

10

35

46

10

58

DMH 43-10

DMH 43-10/43-10

43

10

63

52

10

75

87

10

126

DMH 67-10

DMH 67-10/67-10

67

10

96

78

10

115

-

-

-

DMH 83-10

DMH 83-10/83-10

83

10

120

99

10

144

-

-

-

DMH 100-10

DMH 100-10/100-10

100

10

144

-

-

-

-

-

-

Summary of Contents for DMH 25 Series





















































Reviews: