English (GB)
27
Fig. 21
5.21 Input setup
shows all possible settings.
The inputs for level, stop dosing and diaphragm
leakage can be changed from NO (normally open) to
NC (normally closed) function. If changed, the inputs
must be short-circuited in normal operation. The
dosing monitoring input can be changed from "OFF"
to "ON".
For the analog input, one of the following signal
types can be selected:
•
4-20 mA (default)
•
20-4 mA
•
0-20 mA
•
20-0 mA.
See also section
Fig. 22
Operating display
Operating display
Operating display
without changes
Use the buttons
for navigation
