Eng
lish (US)
20
6.1.1 Home display
Fig. 31
Example of "
Home
" display
6.1.2 Startup guide
The pump incorporates a startup guide which is started at the first
startup. After the startup guide, the main menus appear in the
display.
7. Setting the product
7.1 Grundfos GO Remote
The pump is designed for wireless radio or infrared
communication with the Grundfos GO Remote.
The Grundfos GO Remote enables setting of functions and gives
access to status overviews, technical product information and
actual operating parameters.
The Grundfos GO Remote offers three different mobile interfaces
(MI). See fig. 32.
Fig. 32
Grundfos GO Remote communicating with the pump
via radio or infrared light
7.1.1 Communication
When the Grundfos GO Remote communicates with the pump,
the indicator light in the middle of the Grundfos Eye will flash
green. See section .
Communication must be established using one of these
communication types:
• radio communication
• infrared communication.
7.1.2 Radio communication
Radio communication can take place at distances up to 30
meters. It is necessary to enable communication by pressing
or
on the pump control panel.
7.1.3 Infrared communication
When communicating via infrared light, the Grundfos GO Remote
must be pointed at the pump control panel.
T
M
06
8
9
15
04
17
Pos.
Symbol
Description
1
"
Home
"
This menu shows up to four user-defined
parameters. You can select parameters
shown as shortcut icon
, and when
pressing
you go directly to the"
Settings
"
display for the selected parameter.
2
-
"
Status
"
This menu shows the status of the pump
and system as well as warnings and
alarms.
3
-
"
Settings
"
This menu gives access to all setting
parameters. You can make detailed
settings of the pump in this menu.
See section 7, Description of functions.
4
-
"
Assist
"
This menu enables assisted pump setup,
provides a short description of the control
modes and offers fault advice.
See section
5
This symbol indicates that the pump has
been stopped via the
button.
6
This symbol indicates that the pump is
functioning as master pump in a multipump
system.
7
This symbol indicates that the pump is
functioning as a slave pump in a multipump
system.
8
This symbol indicates that the pump is
operating in a multipump system. See
section 7.44 "Multi-pump setup" ("Setup of
multi-pump system").
9
This symbol indicates that the possibility to
make settings has been disabled for
protective reasons.
TM
05
53
83
43
12
Pos.
Description
1
Grundfos MI 201:
Consists of an Apple iPod touch 4G and a Grundfos
cover.
2
Grundfos MI 202:
Add-on module which can be used in conjunction with
Apple iPod touch 4G, iPhone 4G or 4GS.
Grundfos MI 204:
Add-on module which can be used in conjunction with
Apple iPod touch 5G or iPhone 5.
3
Grundfos MI 301:
Separate module enabling radio or infrared
communication. The module can be used in
conjunction with an Android or iOS-based Smartphone
with Bluetooth connection.
+
1
2
3
+
+
