English (GB)
47
Fig. 87
Reading of power, Q0, 100 % speed (WebCAPS)
Fig. 88
Reading of power, Q0, 50 % speed (WebCAPS)
Fig. 89
Reading of rated power Pnom (WebCAPS)
Setting via control panel
• Settings > Secondary functions > Stop function Settings >
Secondary functions > Stop function > Pump curve data.
4. Select and set:
• Rated flow rate Qnom
• Rated head Hnom
• Max. head Hmax
• Max. flow rate Qmax
• Power, Q0, 100 % speed
• Power, Q0, 50 % speed
• Rated power Pnom.
8.7.40 Control source (4.3.20)
Fig. 90
Control source
Description
The system can be remote-controlled via an external bus
connection (option). See section
. For further
information, see section
The control source, CU 352 or the external bus connection, can
be selected.
Setting via control panel
• Settings > Secondary functions > Stop function > Control
source.
Factory setting
The control source is the CU 352.
TM
03
99
94
48
07
TM
03
99
95
48
07
TM
03 99
96 480
7
Note
Qnom and Hnom are the rated duty point of the
pumps and usually the duty point with the highest
efficiency.
Power, Q0, 100 % speed
Duty point, Q0,
100 % speed
Power, Q0, 50 % speed
Duty point, Q0, 50 % speed
Duty point, rated
power Pnom
Rated power Pnom
