English (GB)
10
6. Electrical installation
Fig. 7
Electrical connection
Carry out the electrical connection and protection according to
local regulations.
• The pump requires no external motor protection.
• Check that the supply voltage and frequency correspond to
the values stated on the nameplate. See section
.
• Connect the pump to the power supply with the plug supplied
with the pump as shown in fig. 7.
• Light in the control panel shows that the power supply has
been switched on.
TM0
5
857
1
2
4
1
3
Warning
The pump must be connected to earth
.
The pump must be connected to an external
mains switch with a minimum contact gap of
3 mm in all poles.
