Cleaning, inspection, maintenance
45 | 68
B
A
_
TD
3
-CK0
0
0
e
n
_
0
2
4
_
e
x
a
liQ.
d
o
cx
7
Cleaning, inspection, maintenance
WARNING:
Risk of contaminated drinking water if the work is not carried out properly.
● Risk of infectious diseases.
► Pay attention to hygiene when working on the product.
Inspection and maintenance of a dosing system is prescribed in the DIN EN 806-5 standard.
Regular maintenance ensures trouble-free, hygienic operation. At least once a year, the
dosing system must be serviced by Grünbeck's technical service/authorised service
company or by specialist installers trained by Grünbeck.
A maintenance contract ensures that all the required maintenance work will be performed
in due time.
► Only use genuine spare and wearing parts from Grünbeck.
7.1
Cleaning
7.1.1
Cleaning the dosing system from the outside
► Only clean the outside of the product.
► Do not use any strong or abrasive cleaning agents.
► Wipe the housing with a damp cloth.
7.1.2
Cleaning with leaked/clogged mineral-based solution
WARNING:
Skin and eye contact with sodium hydroxide solution 5%
– exaliQ-neutra.
● Chemical burns to the eyes and irritation of the skin, respiratory tract possible.
► Use eye protection goggles, protective gloves and sturdy clothing.
► Observe the safety data sheets and strictly follow the instructions.
► Wipe up leaked mineral-based solution with a cloth.
► Clean the areas until completely dry.
