Start-up
28 | 68
B
A
_
TD
3
-CK0
0
0
e
n
_
0
2
4
_
e
x
a
liQ.
d
o
cx
5.1.3
Connect pulse cable (stand-alone dosing system)
1.
Feed the pulse cable of the water meter through the opening in the housing without
pulling or kinking it.
2.
Thread the pulse cable with the plug through the slot of the door.
3.
Loosen the Torx screw (T 20)
– do not unscrew it.
4.
Pull out the cover of the circuit board upwards.
