2
ART. NO.
PUMP CONSTRUCTION
1. The pump is already assembled with the hose, drum cover & bucket. The user just needs to attach the lever handle with the plunger rod.
2. Select the right handle setting for
light, moderate or high viscosity oils.
Attach the lever handle to connecting
lever using the pivot pin and retainer
clip.
3. Pull the plunger rod of piston sub
assembly up. Attach the top of lever
handle to the piston rod using the
piivot pin and retainer clip.
4. Now the pump is ready for
Priming
.
Start the pump by moving the lever
handle. Priming is a process of getting
the pump started by operating the
pump a few times.
Drum Cover
Pivot Pin & Retainer
Clip
PVC Hose
Plunger Rod
Machine Screw
with Hex Nut
Delivery Spout
Suction Tube
Non Return Valve
Piston
Nut
Outlet Adapter
Flange
Connecting Lever
Lever Handle
with Rubber Grip
Steel Bucket
Carry Handle
Cover Lock
ASSEMBLY & OPERATION
NOTE:-
•
If there is any difficulty in Priming, put some oil in the pump outlet and keep operating the lever handle until the discharge begins.
•
There is a machine screw and a hex nut in the flange assembly to hold the pump tube assembly firmly in place.
Do not over tighten the screw and nut.
For Lighter Oils with Low viscosity
For Oils with Moderate Viscosity
For Heavier Oils with High Viscosity
VARIABLE SETTING OF LEVER HANDLE
NOTE
Pump delivers oil on moving
Plunger Rod upwards
