www.groz-tools.com
2
SAFETY INFORMATION
• Keep the work area clean and dry. Damp or
wet work areas can result in injury.
• Check for damaged parts and any other
conditions that may affect the operation
of this product. Replaced damaged parts
immediately
• Do not use the lamp in the immediate vicinity
of inflammable materials or gases.
• Only use the accessories included with the
product.
• Keep the lamp out of reach of unauthorised
persons, especially children.
• Do not point the light directly in your own or
any other person’s or animal’s eyes.
PACKAGING CONTENT
NOMENCLATURE
OPERATING INSTRUCTIONS (Refer
“NOMENCLATURE”)
Charging:
• Fully charge the battery before the first use.
• Turn off the light and connect to the supplied
micro USB charger cable.
• When the battery is fully charged, all the
indicator LEDs will constantly turn GREEN .
• Full charging takes about 4 hours.
Operation:
• To switch ON the light press the button at
the back of the unit.
• To change the intensity of light press the
button again.
• Mount the magnetic base on the stand
as shown below to mount the light on a
metallic surface.
MAINTENANCE
• Before cleaning the LED worklight,
disconnect the USB cable(if being charged)
and allow the worklight to cool down
sufficiently.
• Clean with a dry or slightly moist, clean, lint-
free cloth and a mild detergent if required.
• Do not use cleaners that contain abrasives
or solvents.
• Check the LED worklight for damage before
each use. If the lens is damaged it must be
replaced immediately.
• Clean any dirt from the housing or the
lens immediately, since it could cause
overheating.
DISPOSAL
The components or the used products must
be given to companies that specialize in the
disposal and recycling of industrial waste.
DESCRIPTION
QUANTITY
Light
1
Magnetic base
1
USB cable
1
A.
ON/OFF button (100% /50%)
B.
5V DC micro USB charging port
C.
USB output port for use as Power Bank
D.
4 Battery level indicator
A
B
C
D
Summary of Contents for LED 550
Page 3: ...3...
