www.groz-tools.com
2
SAFETY INFORMATION
• Keep the work area clean and dry. Damp or
wet work areas can result in injury.
• Check for damaged parts and any other
conditions that may affect the operation
of this product. Replaced damaged parts
immediately
• Do not use the lamp in the immediate vicinity
of inflammable materials or gases.
• Only use the accessories included with the
product.
• Keep the lamp out of reach of unauthorized
persons, especially children.
• Do not point the light directly in your own or
any other person’s or animal’s eyes.
• Do not attempt to open the battery
compartment.
PACKAGING CONTENT
NOMENCLATURE
OPERATING INSTRUCTIONS (Refer
“NOMENCLATURE”)
Charging:
• Fully charge the battery before the first use.
• Turn off the light and connect to the supplied
micro USB charger cable.
• Full charging takes about 2 hours.
Operation:
• To switch ON the light press the button at
the front.
• Press the button once for Top Torch
• Press the button twice for Main Light
MAINTENANCE
• Before cleaning the LED, disconnect the USB
cable (if being charged) and allow it to cool
down sufficiently.
• Clean with a dry or slightly moist, clean, lint
free cloth and a mild detergent if required.
• Do not use cleaners that contain abrasives
or solvents.
• Check the LED for damage before each use.
If the lens is damaged it must be replaced
immediately.
• Clean any dirt from the housing or the
lens immediately, since it could cause
overheating.
DISPOSAL
The components or the used products must
be given to companies that specialize in the
disposal and recycling of industrial waste.
DESCRIPTION
QUANTITY
Light
1
USB cable
1
A.
1W LED Top Torch
B.
3W COB Main Light
C.
Magnetic Strip
D.
ON/ OFF Button
E.
Charging Port
A
B
C
D
E
Summary of Contents for LED 335
Page 3: ...3...
