1.
To reduce the risk of electric shock, this lamp has a
polarized plug (one blade is wider than the other ).
The
plug will fit in a polarized outlet only one way. If the plug
does not fit fully into the
outlet reverse the plug. If plug
still does not fit, contact a qualified electrician.
Never use an extension cord unless the plug can be fully
inserted. Do not alter the plug.
2
. Do not install non-factory wiring or any other electrical
components. Altering or modifying the lamp in any way will
3.
Avoid laying objects directly over the power supply cord
to avoid cutting or damaging the wire.
4
. Keep curtains, shades, wall hangings and all other
fabrics and objects away from the lamp shade, light switch
and the light bulb. Lamps are not designed to support
additional weight. Do not hang any objects from the lamp
or any lamp part.
5.
Place the lamp on a stable, level surface in an area
where the lamp will not be tipped over or bumped.
BULB REPLACEMENT
DO
NOT
USE A HALOGEN BULB WITH THIS LAMP.
Halogen bulbs operate at higher temperature and
pose a fire hazard.
1.
Turn off and unplug the lamp and allow bulb to cool
before replacing bulb.
2.
Light bulb should never touch the lamp shade.
CLEANING AND MAINTENANCE
1.
To clean: use a soft, dry cloth only.
2.
Do not use chemical or abrasive cleaning solutions.
Use 60W maximum Type A bulb.
This lamp is approved for indoor use only.
DO NOT EXCEED RECOMMENDED BULB WATTAGE.
17842-026
17842-027
Read and Save:
render the product unsafe.
6.
1. Place the Base (A) on a flat surface .
2. Remove Ring (C) from Socket Assembly (A1).
3 Place the Shade (B) onto the Socket Assembly (A1).
4. Tighten Ring (C) by turning clockwise to keep Shade
(B) in place.
5. Install light bulb (not included) by turning clockwise.
6. Insert the plug into an electrical outlet.
7. Use Pull Chain (D) to turn lamp on and off.
ASSEMBLY INSTRUCTIONS
Table Lamp
IMPORTANT SAFETY INSTRUCTIONS
A
B
C
A1
For Customer Assistance:
www.growthproductsllc.com
Made In China
D
