growplay CP20 - REV 2 Manual Download Page 2

BEFORE YOU BEGIN

 

Thank you for purchasing Growplay Monkey Bars. With regular maintenance, your set will 
provide many years of backyard fun.  

Before you start to assemble your new GROWPLAY MONKEY BAR SET please ensure that 
you have read this important information and that it is communicated to all users prior to 
use.  

INSTALLATION WARNING! 

 

 

Read all important precautions and instructions in this manual and all warnings on 
the equipment to reduce the risk of serious injury. 

 

It is the responsibility of the owners and supervisors of this equipment to ensure 
that it has been correctly assembled, anchored, maintained and the users obey the 
safety instructions.  

 

This product is intended for use by children 

AGE OF USERS 3+

 

 

Until the equipment has been correctly assembled and anchored, do not let children 
use equipment. 

 

Always use Growplay Monkey Bars under adult supervision. 

 

It is required that the play equipment be ground anchored with the ground anchor 
nails provided onto a soft or shock absorbing surface. 

 

Do not install over concrete or any other hard surface as a fall onto a hard surface 
could result in serious injury or death.  

 

Ensure that the equipment is installed on a level surface and no less than 1.8 metres 
from any structure or obstruction. 

 

Always inspect the equipment before it is used and replace any worn, defective, or 
missing parts.  

 

Ensure that all connectors are regularly checked.  

 

ELECTROCUTION HAZARD 

Growplay monkey bars are made from metal. They are not grounded and will conduct 
electricity. For obvious reasons and electrocution hazard exists. NO lights, heaters, electrical 
and extension cords or any household electrical device or appliances are to be permitted on 
or in the frame at any time. 

WARNING: THIS DISASSEMBLED PRODUCT MAY CONTIAN SMALL PARTS 

WHICH POSE A CHOKING HAZARD TO CHILDREN UNDER 3. 

WARNING: ACCESSORIES MUST ONLY BE ATTACHED IN POSITIONS AS SHOWN IN 

THESE INSTRUCTIONS. FAILURE MAY RESULT IN DEATH OR SERIOUS INJURY. 

Summary of Contents for CP20 - REV 2
























Reviews: