Growing GRENGINE Ultralite User Manual Download Page 6

3. CHARGING YOUR GRENGINE

TM

4

4

3.2 CHARGING FROM THE ELECTRICAL WALL SOCKET

BEFORE USING OR STORING, PLUG YOUR GRENGINE

TM

 INTO THE WALL UNTIL IT IS FULLY CHARGED.

GRENGINE

TM

GRENGINE

TM

CAR CHARGER

ELECTRICAL WALL SOCKET

DEVICE

DEVICE

•  The included AC wall charger comes in two pieces. Connect the two 

pieces by plugging the cable into the box.

•  Using the AC Wall Charger, plug your GRENGINE

TM

 into any electrical 

wall socket. You will know your GRENGINE

TM

 is charging when the 

battery segments in the BATTERY DISPLAY are blinking and the 

number below INPUT on the LCD screen changes.

•  The GRENGINE

TM

 is fully charged when all battery segments stop 

blinking and remain solid. It should recharge from the electrical wall 

socket in 6-8 hours. The GRENGINE

TM

 will stop charging when the 

battery is fully charged.

Use the car charging cable, plug one end into your car’s cigarette socket and the other end into your 

GRENGINE

TM

. You will know your GRENGINE

TM

 is charging when battery segments in the 

BATTERY 

DISPLAY

 are blinking and the number below 

INPUT

 on the 

LCD

 screen changes.

Note:  A car with a 12V starting battery can not charge your GRENGINE

TM

 fully, but a car with a 24V battery can. 

3.3 CHARGING FROM YOUR CAR

PLUG #3

PLUG #3

Summary of Contents for GRENGINE Ultralite














Reviews: