9
5.
Mounting
5.1
Environment Requirements
Check to make sure the installation site does not fall into any of the
following conditions: If any do, then a risk assessment will be required.
•Unsafe due to assessment of occupational health safety risks.
•The ambient temperature is outside the range of tolerable ambient
temperature(-20°C to +50°C, -4°F to +122°F).
•Close to flammable materials or areas where flammable materials are
stored.
•Prone to be damaged by sea water.
•Prone to be flooded or high levels of snow falls.
•Close to corrosive gas or liquid (for example, locations where chemicals
are processed or stored).
•Exposed to direct sunlight or in an enclosure exposed to direct sunlight.
•Little or no air flow
•Mounted on a surface without suitable fire/heat rating.
•Mounted on a wall without suitable load holding capacity.
•High humidity.
•Sites considered unsafe because of local regulations.
•Confined space without adequate airflow.
•Area subject to sand or dust storms.
•Exposed to steam, vapor, or water.
Installation and maintenance personnel must operate according to
applicable federal, state and local regulations as well as the industry
standard. The product installation personnel shall wear safety gears,
etc. in order to avoid short circuit and personal injury.