background image

Before using the ZigBee Module, please read the manual carefully. In the meantime, 
please  keep  it  well,  lest  maintenance  staff  may  not  find  it  later.  All  the  content, 
pictures, logos, symbols are reserved. No part of this document may be transmitted in 
any  form  without  the  prior  written  permission  of  our  internal  staff.  The  content  of 
manual  could  be  changed.  Every  attempt  has  been  made  to  make  this  document 
complete,  accurate  and  up-to-date.  If  there  are  any  differences  between  the 
contents  of  the  instruction  and  the  product,  please  regard  the  actual  one  as  the 
truth. You can download the newest version from our website www.growatt.com .

1.4 Guideline

2

1.5 FCC Warning

This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the 
following two conditions:

(1) This device may not cause harmful interference.

(2)  This  device  must  accept  any  interference  received,  including  interference  that 
may cause undesired operation.

Changes  or  modifications  not  expressly  approved  by  the  party  responsible  for 
compliance could void the user's authority to operate the equipment.

NOTE:  This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 
to  provide  reasonable  protection  against  harmful  interference  in  a  residential 
installation. This equipment generates, uses and can radiate radio frequency energy, 
and, if not installed and used in accordance with the instructions, may cause harmful 
interference  to  radio  communications.  However,  there  is  no  guarantee  that 
interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does  cause 
harmful  interference  to  radio  or  television  reception,  which  can  be  determined  by 
turning  the  equipment  off  and  on,  the  user  is  encouraged  to  try  to  correct  the 
interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Statement

To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be 
installed and operated with minimum distance 20cm between the radiator and your 
body: Use only the supplied antenna.

Summary of Contents for ZigBee Module


















Reviews: