4.
Scan or input the Shine GPRS-F barcode and checkcode, then click “Register”, after register succeed, it will
move you to the “my plant” page.
2.
Select country and city, then click “Next” enter next page.
Note: If you select a wrong country and city, the system
time maybe wrong.
3.
Fill out the required information, then click “Next”, it
will guide you to the “Add datalogger” page.
5.
In “my plant” page, select the inverter in the device list to check the inverter update
information.
6.
If you want to add/edit/delete/configure a datalogger, click the “+” sign on the right top side of the “my plant”
page. There are 4 options in the dialog window when push on the datalogger’s serial number, click the one you need.
Note:1) After add Shine GPRS-F to server account, it will automatic communicate with Growatt server, you can
remove the
when it turns from flash every 0.2 sec to flash
every 1 sec,
2) If want change Shine GPRS-F to a new account, delete it from previous account first, then add it to
new account.
3) If want to set Shine GPRS-F to factory settings, remove the rubber plug, and press the KEY button for
6 sec until blue LED always ON.
4) If want to restart Shine GPRS-F, short press the KEY button.
rubber plug on the KEY button to check the blue LED,
mean communication OK.
