5.4 Wall Mount Bracket Installation
Before install the inverter you need install the wall mount bracket so that the inverter can
be firmly installed on the wall.
Wall mount plan:
Fig
5
.
7
Fig
5
.
8
Fig
5
.
9
Fig
5
.
10
1>Use the wall mount plate as a template drill holes on the wall and put in expansion
bolts.
2>Follow
the
following
drawing
put
the
bolt
to
install
the
wall
mount
plate
on
the
wall
.
Fig
5.11
Notice: Do not install inverter unless you have confirmed the wall mount plate has been
firmly installed on the wall.
Notice
：
Expansion bolt should be installed on solid walls with at least 100mm thickness.
5
.
5
Installing
The
Inverter
After the wall mount bracket has been firmly installed on the wall , put the inverter on
that plate.
1>Use the rope(must meet the weight requirement of the inverter) through two rings
and lift the inverter up, just as following Figure.
2>Before hanging the inverter on the wall mount bracket use screws to fix the inverter
and please keep the inverter balance.
3>Check the inverter if it is firm enough and lock all the screws.
14
13
Plan 2(Optional):
1>As shown in
Fig5
.
8
,
4
-
6
persons
lift
the
inverter
out
of
package
,
swap
the ring to
moving
handles
.
2>When
you
are
moving
the
inverter
,
please
keep
the
balance
.
Notice: There will be front and bottom mark on the package.
