12
11
5.1 Safety instructions
4
Unpacking and inspection
Installation 5
Danger to life due to fire or explosion
Ø
Despite careful construction, electrical devices can cause
fires.
Ø
Do not install the inverter on easily flammable materials and
where flammable materials are stored.
Risk of burns due to hot enclosure parts
Mount the inverter in such a way that it cannot be touched
inadvertently.
The inverter is thoroughly tested and inspected strictly before delivery. Our inverters
leave our factory in proper electrical and mechanical condition. Special packaging
ensures safe and careful transportation. However, transport damage may still occur.
The shipping company is responsible in such cases. Thoroughly inspect the inverter
upon delivery. Immediately notify the responsible shipping company if you discover
any damage to the packaging which indicates that the inverter may have been
damaged or if you discover any visible damage to the inverter. We will be glad to assist
you, if required. When transporting the inverter, the original or equivalent packaging
should be used, and the maximum layers for original carton is four, as this ensures
safe transport.
After opening the package, please check the contents of the box. It should contain the
following, Please check all of the accessories carefully in the carton. If anything
missing, contact your dealer at once.
Quantity
A
B
C
D
E
F
G
H
I
J
K
L
Inverter
Quick Guide
1
1
1
1
2
4
4
4/4
4/4
6
1
1
Object
Description
User manual
Cross Combination Screw
RS485 Connectors
Explosion bolt
OT Terminal
Countersunk head screw
PV+/PV- terminal
PV+/PV- metal terminal
RS485 Waterproof cover
AC Waterproof cover
Ø
All electrical installations shall be done in accordance with the local and national
electrical codes. Do not remove the casing. Inverter contains no user serviceable
parts. Refer servicing to qualified service personnel. all wiring and electrical
installation should be conducted by a qualified service personnel .
Ø
Carefully remove the unit from its packaging and inspect for external damage. If
you find any imperfections, please contact your local dealer.
Ø
Be sure that the inverters connect to the ground in order to protect property and
personal safety.
Ø
The inverter must only be operated with PV generator. Do not connect any other
source of energy to it.
Ø
Both AC and DC voltage sources are terminated inside the PV Inverter. Please
disconnect these circuits before servicing.
Ø
This unit is designed to feed power to the public power grid (utility) only. Do not
connect this unit to an AC source or generator. Connecting Inverter to external
devices could result in serious damage to your equipment.
Ø
When a photovoltaic panel is exposed to light, it generates a DC voltage. When
connected to this equipment, a photovoltaic panel will charge the DC link
capacitors.
Ø
Energy stored in this equipment's DC link capacitors presents a risk of electric
shock. Even after the unit is disconnected from the grid and photovoltaic panels,
high voltages may still exist inside the PV-Inverter. Do not remove the casing
until at least 5 minutes after disconnecting all power sources.
Ø
Although designed to meet all safety requirements, some parts and surfaces of
Inverter are still hot during operation. To reduce the risk of injury, do not touch the
heat sink at the back of the PV-Inverter or nearby surfaces while Inverter is
operating.
