background image

2

OGAL-CF40 Instruction Manual

SAFETY RECOMMENDATIONS

GENERAL RECOMMENDATIONS

CARE & MAINTENANCE

Use of gloves is strongly recommended during assembly.

Do not attempt to assemble the cold frame in extreme weather conditions.

Do not touch overhead power cables with the aluminum profiles.

Always wear shoes and safety goggles when working with extruded aluminum.

Dispose of all plastic bags safely, and keep out of reach of children.

Position the unit on a level surface.

Keep children away from the assembly area.

Do not position the greenhouse in an area exposed to excessive wind.

Do not attempt to assemble the structure if you are tired, have taken drugs or

alcohol, or if you are prone to dizzy spells.

Thermally conductive items such as grills, blowtorches, etc., must not be stored in the 

wall shed.

Ensure there are no hidden pipes or cables in the ground before inserting the pegs.

This compound can be assembled in 30 minutes by one person.
The component parts should be checked and laid out nearby

Use a mild detergent solution to clean the frame and/or panels, and rinse with cold, 

clean water.
Do NOT use acetone, abrasive cleaners, or other special detergents to clean the 

clear panels.

Summary of Contents for OGAL-CF40












Reviews: