Grow GM73, User Manual

Page: 15 / 79

www.hzgrow.com 8
4.2.1 Break Time Settlement
Time between two read.
Default:500ms, Unit:100ms, Range:0-9900ms
You can set the break time by scanning the bar code, example:
Set 0.5ms, first scan the bar code below. Then scan the “0” and “5” bar code in the Digital Setting
Code (Appendix 1).
Break time settlement
4.3 Induction Mode
In automatic sensing mode, the reading engine detects the brightness of the surrounding
environment. When the brightness changes, module will begin to read, read successfully or the reading
time exceeds the single reading time,the reading will be finished. Regardless of the last read success or
failure, the module will be redetects the brightness of the surrounding environment.
Induction Mode
4.3.1 Stable Induction Time
Stable time before entering the test environment. Default: 500ms, Unit:100ms, Range:0-9900ms
You can set the stable time by scanning the bar code, example:
Set 200ms,first scan the bar code below. Then scan the “0” and “2” bar code in the Digital Setting
Code (Appendix 1).
Set 1500ms,first scan the bar code below. Then scan the “1” and “5” bar code in the Digital Setting
Code (Appendix 1).