HOTRONIX
®
FUSION
™
HOTRONIX
®
FUSION
™
3.4
2.
7
3.
2.2
2.1
3.3
190
F
190
F
S E R V I C E H O T L I N E : 8 0 0 . 7 2 7 . 8 5 2 0 H O T R O N I X . C O M
To shut down your Fusion
™
Press:
Select the “Main Menu” button in
the operation screen. (3.1)
Then select the “Shutdown”.
function in the Main Menu or flip
the power switch to the off position.
(3.2)
When the heat platen is above
100°F (38°C), the current platen
temperature is displayed on a
orange background as a warning
of the current platen temperature.
(3.3)
Note:
During this time, the Shutdown operation can be exited by simply pressing the touch screen. The Dream Board
will exit the Shutdown screen and return to the Main Menu.
Once the platen has cooled below 100° F (38° C), the touch screen will go blank. (3.4)
Note:
The Hotronix
®
Fusion
™
is equipped with an Auto Sleep Mode. When the machine is not in use for a period of
four hours, it will enter an energy saving sleep mode. To restore to normal operating mode, press the touch screen
and allow the heat press to return to the target temperature.
Start Up
Shut Down
To start up your Fusion
™
Press:
Flip the Power switch to the “On”
position. (The power switch is
located on the top of the control
housing).
(2.1)
During the startup,
a splash screen is shown for
approximately 3 seconds. This
screen displays the Hotronix
®
logo
and current software version
information. (2.2)
Version : 1.0 X7
3/19/10 1:27 PM
New Preset 1 : 8s, 10s, 330F, 5PR
330
F
5
PR
Counter : 1
Main Menu
330
F
5
S
3/19/10 1:28 PM
Main Menu
Shutdown
Operation
Setup
3/19/10 1:28 PM
Main Menu
Shutdown
Operation
Setup
