13 / 21
Safe Communications Ltd
March 2003
7. PROGRAMMING
The TLS376E1S telephone is designed to facilitate programming remotly over a telephone
line. Programming is carried out using sequences keyed from a DTMF telephone, when
connected to the TLS376E1S telephone to be programmed.
7.1 PROGRAMMING CODES
IMPORTANT :
Before all programming, key the access code : *1234* (factory setting) or as
changed by the user (see function 12/13 below).
The acceptance sequence is a single beep if memory M0 (see function 18 below)
if empty or a single beep followed by the contents of Memory 0 folloxed by « * »
if memory M0 has been programmed.
Non-acceptance is indicated by « no-response » in which case it is necessary to
try again.
Proceed with programming as follows :
For each programming sequence below the telephone gives an acceptance/non-acceptance
sequence. The acceptance sequence is a mix DTMF tones (functions N° 1, 5 and 18 below)
or a single beep (all other functions).
In all cases the non-acceptance sequence is two beeps.
If the non-acceptance sequence is received, it is necessary to try again.
