GROUNDTECH DISCOVERY Series, User Manual, Page: 11 / 37

| 10 |
Line Step
Line : You must enter the row size of the search area in meters
or steps according to the unit you have selected in the "Meas-
urement type" section. Depending on the number of signal
pulses you have entered, you should go to the next scan row
when the signal pulses are over.
Step: You must enter the row size of the search area in meters
or steps according to the unit you have selected in the "Meas-
urement type" section.
Target Type : You can select three different search objectives:
Small, General and Tunnel according to the purpose of your
screening. Small should be selected if your target is small ob-
jects. In the Small option, each scan signal range should be 15-
20 cm. You can select the General scan, such as normal object,
space, structure. In this option, your scan signal range should
be between 25 and 35 cm. You can select the Tunnel option
for your scans covering large areas such as tunnel, room, and
grave. In this option you can search at 50 cm intervals.
For example; If you select 10 signal steps and select small as
the target type you will scan with a distance of 30 cm each;
You will have created a scanning line of 300 cm or 3 meters.