A
C
This is a view of the distance measuring wheel on
the TCGCO attachment, the three pronged spokes
touch the grass surface turning the drive mecha-
nism that operates the Chop Blade to chop at the
required length . The spokes can be adjusted in and
out to vary the length of turf/sod required.
B
C
A
ADJUSTMENT OF SPOKES
The method of this adjustment is to slacken the
13mm Bolt at ‘B’ then proceed to move the spoke
‘A’ in or out to get the correct cut length. The chop
lengths are shown on the sticker ‘C’. See page 7 for
more details on this.
When adjusting spokes ‘C’ for different chop
lengths remember all six spokes will need adjusting
to same settings.
This is a close up picture of the distance wheel
spoke and shows the markings ‘A’ for settings the
length of chop
Page 6
Operating Instructions
