Ground Zero Uranium GZUA 1.1000DX, Owner'S Manual

Page: 7 / 23

Amplifier
Owner’s manual
URANIUM
GZUA 1.1000DX
2
PLEASE READ BEFORE INSTALLATION
Thank you for selecting a
GROUND ZERO
Uranium amplifier. We are providing a helpful hints list
which should keep you from experiencing unnecessary shut down
Introduction Class-D Amplifier
Amplifiers provide high-performance sound reinforcement for you mobile audio equipment. It’s versatility enables
compatibility with optional equalizer, frequency dividing network crossovers, and other audio processors in a
customized system.
The Multi-Mode bridging capabilities allow flexibility in hosting several different speaker configurations.
To achieve optimum performance, it is highly recommend that you read this owner’s manual before beginning the
installation.
Features
• Class-D High Power Amp
• Efficiency >86%
• Damping factor >140 at 4 Ω
• Linkable with 1 amplifier
• 1 Ω stable (Linkmode 2 Ω )
• MOS-FET PWM Power Supplies
• Power and Protection indicator
• Lowpass crossover
• Subsonic filter variable
• 180° Phase Shift variable
• Bass boost
• Aluminium heat sink
• RCA input / output
• Bassremote control
• Operating voltage: DC 10V ~ 16V input
• 3 Gauge / 25mm² battery Input Connectors
Tools and materials you need
• Screwdriver, electric drill 1/8 carbide drill bit
• Use 3 AWG power wire (min. 25 mm²)
• Ground your amplifier one meter close to installation location
• Use 13 AWG speaker wire or heavier from your amplifier to your speakers
• Look for burs in the path of your wires and file the flat to avoid puncture
•
Use 16 AWG wire for remote trigger
Note all wire gauges are based on stranded wire with polarity indicators on two wire configurations.