Mounting ring
The aluminum cast fastening ring can be used with either the 3-D flat logo rim only covering the mounting
screws or the 3-D logo rubber rim together with the protection grill.
Installation
1
2
First, connect the wiring and put the subwoofer to the
cutout*. Place the aluminum fastening on top and
fasten it using the screws included (or other matching
threaded countersunk screws)
* sealing tape or foam is recommended, if necessary
Next, insert the rubber rim to the matching recesses
in the fastening ring. And finally, cover the subwoofer
with the protection grill by inducting it into the gap of
the logo rubber rim.
