4
Controls & Features – GZCA 8.0K-SPL
1
INPUT socket
to connect RCA wire* from the audio source / head unit
2
OUTPUT socket
to connect another amplifier /provides the original audio signal
3
FILTER HP control
to adjust the required high pass crossover point from 5 Hz to 80 Hz
4
FILTER LP control
to adjust the required low pass crossover point from 80 Hz to 20 KHz
5
LEVEL control
to adjust the input sensitivity
6
BASS BOOST control
to adjust the bass boost level from 0 dB to +12 dB
7
BOOST FREQ. control
to adjust the bass boost frequency from 35 Hz to 55 Hz
8
9
OUTPUT terminal
(+) positive speaker wire connection
( - ) negative speaker wire connection
10
11
12
POWER supply terminal
+BAT
-> to the battery connection /+12 V
REM -> to the remote output of the head unit
GND
-> to the ground connection
13
14
15
STATUS signs
POWER indication sign
PROTECTION
indication sign
CLIPPING indication sign
* To avoid any kind of malfunction, it is strongly recommended to use high quality RCA wires!
Summary of Contents for GZCA 8.0K-SPL
