4
Controls and features – GZCA 35.0SPL-M1
* to avoid any kind of malfunction, it is strongly recommended to use high quality RCA wires!
Connections – GZCA 35.0SPL-M1
1
RCA signal input
To connect the RCA signal wire* from the audio source / head unit
2
RCA signal output
To connect another amplifier (using an RCA cable)
3
Input sensitivity (LEVEL)
To adjust the input sensitivity
4
LINK IN
To connect the amplifier using a link wire with the master amplifier
5
LINK OUT
To connect the amplifier using a link wire with a slave amplifier
6
Speaker wire terminal
To be connected to one or more speakers
(pay attention to the minimum load mentioned for your amplifier model)
GZCA 35.0SPL-M1 Minimum load at terminal 1 ohm
7
Power status, clipping and
protection LED
Indicating the power and clipping status and activated protection mode
1
Po
wer terminal
BAT
To be connected to the positive terminal of the battery (+12 V)
REM To be connected to the remote output of the head unit
GND
To be connected to the ground of the vehicle
Summary of Contents for COMPETITION GZCA35.0SPL-M1
Page 5: ...5 Verkabelung GZCA 35 0SPL M1...
Page 13: ...5 Wiring GZCA 35 0SPL M1...
