4
Controls and features – GZCA 1500.2-D1 / -D2
* to avoid any kind of malfunction, it is strongly recommended to use high quality RCA wires!
Connections – GZCA 1500.2-D1 / -D2
1
Power status LED
indicates the power status
2
Crossover switch
sets the crossover to HP or full range or LP operation
3
Crossover control
to adjust the crossover point (50 Hz - 1000 Hz)
4
Level control
to adjust the input sensitivity
5
RCA signal input
to connect RCA wire* from the audio source / head unit
Speaker terminal
to be connected to one or two speakers
(pay attention to the minimum impedance mentioned for your amplifier model)
GZCA 1500.2-D1 Stereo - speaker impedance min. 1 ohm
Mono
- speaker impedance min. 2 ohm
GZCA 1500.2-D2 Stereo - speaker impedance min. 2 ohm
Mono
- speaker impedance min. 4 ohm
Power terminal
BAT
to be connected to the positive terminal of the battery (+12 V)
REM to be connected to the remote output of the head unit
GND
to be connected to the ground of the vehicle
