Page 7
Need more information?
gtl.biz/satsw
MAC ADDRESS
0001CE20001
SAT-ADV-C-MLT-00000001
Load/Clear
Status
Reset
!
!
12V 5A MAX
RS-485
A B S
Optical
Tamper
Run cabling from the doors, locks,
inputs and outputs.
The case includes breakouts to
permit cable entry and a void
behind the case offers plenty of
space for cabling.
Attach the case to the wall in the
desired location.
The optical tamper will operate as
soon as the case is closed
Connect a suitable 12V external
power supply, if used.
Connect the IP and/or RS485 cable
as required. See page 18 for details.
If using PoE, IP connection will
apply power to the controller.
Snap the Blade into the controller.
Ensure the Blade is inserted before
any power source is connected.
For
Door Blade
connections,
see page 8. For
I/O Blade
connections, see page 10.
Install the lithium polymer back-up
battery if required.
The battery ensures operation of
equipment during power outage.
Note that data is retained even
without a battery fitted.
1
3
2
4
5
6
Once power is applied to the
controller it will be visible to the
Sateon Quick Start application.
1
2
3
4
5
6
