GR
OSPOL Jędruch Sp
.J.
Ost
ródz
ka 53
03-289
Warsaw
www
.g
rospol.pl
Team Plus HD SP2 R1/R6 - assembly instructions
List of parts:
- 5 castors
- 1 base
- 1 gas lift
- 1 backrest
- 1 seat with SP2 mechanism
- 2 R6 armrests (left/right)
- 4 M6x25 screws
- 2 screws M6x20
- 3 M8 washers for backrest assembly
- 4 M8 pads for R1 armrest version
- 3 screws M8x12
- Allen wrench for screws (shape "L")
ASSEMBLY
NOTES!
The chair has been granted the Certificate of Durability, Stability and Safety of Use issued by PUR "Remodex"
Furniture Industry Research and Implementation Facility.
1. Push the castors into the base of the chair.
2. Insert the gas lift into the hole in the chair
base.
3. Screw the armrests using two M6x25
screws and one M6x20 screw for each
armrest. For R1 armrests, we use round
washers in addition to the two external screws
of both armrests M8.
4. Screw the backrest to the mechanism already
in the seat using three M8x20 screws and three
M8 washers.
TEAM PLUS CHAIR OPERATION
A
B
A -
Seat height adjustment.
Pulling the lever
upwards raises the seat. Releasing the lever
to the initial position will lock the selected
height.
B -
Adjusting the backrest angle in relation
to the seat
- use the lever (B) to block the
selected backrest angle in relation to the seat
(sliding the lever inwards) or release the
movement of the backrest following the
movement of the user's back (pushing the
lever outwards).
C -
Adjustment of armrests (R1/R6)
-
R6
: while sitting in a chair after pressing the
button on the outside of the armrest, you can
change the height of the forearm support.
R1
: armrests, in addition to height adjustment,
have a front-back adjustable overlay and a
possibility to change of position angle.
D -
Backrest resistance force adjustment
-
a knob for adjusting the backrest resistance
force during tilting. The force is adjusted to the
user's weight.
E -
Adjustment of seat depth
. Pulling the
lever upwards slows down the forward and
backward movement of the seat.
C
D
5. The seat with the backrest and armrests
screwed on is placed on an actuator, which is
already in the base equipped with castors.
E
2x M6x25
screws
1x M6x20
screw
M8 washers
for R1 version
