STYLUS (NEEDLE) REPLACEMENT
Replacement of a worn stylus can be easily accomplished as follows.
1. Raise the "Tone Arm".
2. To remove stylus, pull out the stylus assembly in direction shown(1)(2),
holding the head shell with your other hand.
3. Then install the new stylus by pushing it gently into the cartridge(3)(4) (hold by
the sides to prevent damage to stylus) until it clicks into place.
When the stylus eventually needs replacing, a replacement stylus is
available for purchase directly from the manufacturer: www.groov-e.co.uk or call
+44 (0) 20 8839 0971 for more information.
CARE AND MAINTENANCE
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps
or motors.
3. Unplug the unit from the electrical power outlet immediately in case of malfunction.
CLEANING THE UNIT
•
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
•
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use caution
when cleaning and wiping the plastic parts.
•
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays on
the cabinet.
•
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth
slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as
these will damage the finish of your unit.
CAUTION:
Never allow any water or other liquids to get inside the unit while cleaning.
SPECIFICATIONS
AC POWER
AC 230V ~ 50Hz
TURNTABLE
33 1/3, 45 RPM
OUTPUT POWER
2 X 1W RMS
NOTE: Due to ERP stage two requirements and to protect the environment, the
unit will switch to standby mode automatically if no is music playing after 15
minutes.
INSTRUCTIONS ON ENVIRONMENT PROTECTION
DO NOT DISPOSE OF THIS PRODUCT IN THE USUAL HOUSEHOLD WASTE AT THE END OF ITS LIFECYCLE,
HAND IT OVER AT A COLLECTION POINT FOR THE RECYCLING OF ELECTRICAL AND ELECTRONIC
APPLIANCES. THE SYMBOL ON THE PRODUCT, THE INSTRUCTIONS FOR USE OR THE PACKING WILL
INFORM THEM ABOUT THE METHODS FOR DISPOSAL. THE MATERIALS ARE RECYCLABLE AS INDICATED
BY THE SYMBOL ON THE LEFT.
BY RECYCLING, MATERIAL RECYCLING OR OTHER FORMS OF RE-UTILIZATION OF OLD APPLIANCES, YOU
ARE MAKING AN IMPORTANT CONTRIBUTION TO PROTECT OUR ENVIRONMENT. PLEASE CONTACT YOUR
LOCAL COUNCIL FOR THE AUTHORIZED DISPOSAL LOCATION AND RECYCLING FACILITIES.
Unit J, Braintree Road
Braintree Industrial Estate
Ruislip
Middlesex HA4 0EJ
UK
www.groov-e.co.uk
