18
BEFORE USE:
Check if the On/Off switch is in the “Off ” position (1). Plugging the power tool with the switch in the
“On” position will cause an unexpected start resulting in serious safety risk.
When using an extension cord because of the great distance to your power source, employ a cord that
has core cross-section of at least 1.5 mm. Using a thinner cord, may lead to lower power of the machine
and overheating which in consequence can cause combustion.
Mounting the Accessory Tool
Before mounting the accessory tool, make sure that the rated rotating speed given on a wheel is the
same as or higher than the power tool rotating speed.
To replace the accessory tool in GPC 6-89 GL, follow these instructions:
1.
Unplug the tool from the power supply.
2.
Push the button (14) to lock spindles.
3.
Unscrew the bolt mounting spindles (6) with the wrench (17). The bolt unscrews clockwise
4.
Push the button (11) releasing the guard lock and pull out the wheel to the maximum.
5.
Fit the accessory tool on the spindle. In the case of diamond wheels (20 and 22), a HSS wheel
(18) and a saw blade (19), make sure that the spindle rotation direction is the same as the
rotation direction given on a wheel.
6.
Fit the mounting fl ange (5) on the wheel mounted on the spindle, next, fi t the bolt (6) and
tighten fi rmly.
7.
To remove the wheel, the above mentioned steps should be carried out in the reverse order.
1
2
Pilarka_precyzyjna_Full_v04_HR.indd 18
Pilarka_precyzyjna_Full_v04_HR.indd 18
2016-10-19 04:03:00
2016-10-19 04:03:00
