![background image](http://html1.mh-extra.com/html/grone-0/gmt-92/gmt-92_user-manual_2269695016.webp)
16
The particles of sanded materials released when operating the machine can be hazardous to health.
They can cause cancer, allergic reactions, pulmonary diseases or even congenital diseases and aff ect
reproductive functions. Some examples of the chemicals are: lead from paint, some tree species (oak,
beech), chromates in lumber preservation chemicals, crystalline silica (concrete, plaster sanding), other
metals and asbestos.
NOISE AND VIBRATION NOTICE:
The measured values of noise have been established according to EN 60745 standard. The level of noise
generated by the can exceed the A-weighted sound pressure levels of 82 dB(A).
Wear ear protection!
unit
2544-920400
GMT 92
Vibrations emission value ah
m/s
2
>10
Measurement uncertainty K
m/s
2
1,5
WORK PREPARATION:
Make sure you toggle the switch to the “OFF” position. Plugging the device to the power source with
the switch in “ON” position can lead to unintentional startup of the tool which poses a threat to
safety.
If your work area requires use of extension cable, use the cables with contractors of minimum cross-sec-
tion of 1,5mm. Using smaller cable can result in reduction of machine’s capacity and overheating,
which can cause ignition.
Tool assembly
Unplug the power tool from the power source before attempting to work on it. In order to assemble
the tool:
1.
Unscrew the spindle fastener (7) by using attached key (8)
2.
Place the tool on the spindle (6) so that the protrusions overlap with the holes in the grip of
the equipment (9, 11, 12)
3.
Set the tool at the desired angle. The tool can be assembled to maximise work ergonomics.
4.
Remember to place the defl ection of the equipment on the proper side (look below)
5.
Secure the equipment mounted on the tool with a spindle fastener (7) and tighten it fi rmly.
Multinarzadzie_Full_v04_HR.indd 16
Multinarzadzie_Full_v04_HR.indd 16
2016-10-19 01:46:12
2016-10-19 01:46:12